Budget Inks for HP DesignJet 9000s 10000s 790

European Languages

Asian Languages

African Languages

SAM*INK® inks 9000s 10000s

First Published: 2010-September-22th.
Last Updated: 2013-February-20th.

Please click on the mini thumbnails above to view reports.

Flaar Dr. Nicholas Hellmuth reviews SAM*INK® 9000s inks.
Flaar Dr. Nicholas Hellmuth inspects SAM*INK® 9000s factory & end-users.

SAM*INK® 9000s no.790 ink series are quite honestly the perfect replacement for your HP DesignJet 9000s and 10000s printers. Our customers are quite happy to show you the ISO9001 image quality. Unlike other replacement inks, you do not really have to flush or change your RIP's color profiles. The acetate's chemistry and nano-color-pigments matches your original HP 790 inks. If you are looking for a replacement ink for your printer, this is the right choice:

Perfect replacement for your HP 790 inks.
Same color pigments, no need to change your profiles.
Same acetate chemistry, no need to flush your ink lines.
Same printhead compatibility, long printhead life.
Same media compatibility, same outdoor durability as your HP 790 inks.
Use the same wiper CB293A and cap CB294A type of cleaning fluids.
No switch-over costs or concerns.
Trained and Certified DesignJet Franchisees near you.

Call our dealers, licensees, or franchisees for a free on-site demonstration today!

This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it

1-Liter Plug-n-Print Ink-Cartridges

790.cb271 K Ct.....SAM*INK® 9000s no.790 K 1-Liter Ink-Cartridge Black. USD199.99

790.cb272 C Ct.....SAM*INK® 9000s no.790 C 1-Liter Ink-Cartridge Cyan. USD199.99

790.cb273 M Ct.....SAM*INK® 9000s no.790 M 1-Liter Ink-Cartridge Magenta. USD199.99

790.cb274 Y Ct.....SAM*INK® 9000s no.790 Y 1-Liter Ink-Cartridge Yellow. USD199.99

790.cb275 Lc Ct....SAM*INK® 9000s no.790 Lc 1-Liter Ink-Cartridge Light-Cyan. USD199.99

790.cb276 Lm Ct....SAM*INK® 9000s no.790 Lm 1-Liter Ink-Cartridge Light-Magenta. USD199.99

Call our dealers, licensees, or franchisees for a free on-site demonstration today!

This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it

1-Liter Ink-Bottle

790.cb271 K 1L....SAM*INK® 9000s no.790 K 1-Liter Ink Bottle Black.

790.cb272 C 1L.....SAM*INK® 9000s no.790 C 1-Liter Ink Bottle Cyan.

790.cb273 M 1L....SAM*INK® 9000s no.790 M 1-Liter Ink Bottle Magenta.

790.cb274 Y 1L.....SAM*INK® 9000s no.790 Y 1-Liter Ink Bottle Yellow.

790.cb275 Lc 1L....SAM*INK® 9000s no.790 Lc 1-Liter Ink Bottle Light-Cyan.

790.cb276 Lm 1L....SAM*INK® 9000s no.790 Lm 1-Liter Ink Bottle Light-Magenta.

Call our dealers, licensees, or franchisees for a free on-site demonstration today!

This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Going on Holidays ?...use Flush Cartridges to Switch-Off the Printer.

790.cb271 K Ct Flush....SAM*INK® 9000s no.790 K Flush Cartridge Black.

790.cb272 C Ct Flush....SAM*INK® 9000s no.790 C Flush Cartridge Cyan.

790.cb273 M Ct Flush....SAM*INK® 9000s no.790 M Flush Cartridge Magenta.

790.cb274 Y Ct Flush.....SAM*INK® 9000s no.790 Y Flush Cartridge Yellow.

790.cb275 Lc Ct Flush....SAM*INK® 9000s no.790 Lc Flush Cartridge Light Cyan.

790.cb276 Lm Ct Flush...SAM*INK® 9000s no.790 Lm Flush Cartridge Light Magenta.

Call our dealers, licensees, or franchisees for a free on-site demonstration today!

This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Clean Your Printheads: Wipers & Caps.

790.Swabs Long Handle.....SAM*INK® 9000s no.790 Swabs. 100 pcs/bag.

790.cb293-Wiper Liq 1L......SAM*INK® 9000s no.790 Wiper Cleaning Liquid 1-Liter Bottle.

790.cb294-Cap Liq 1L..........SAM*INK® 9000s no.790 Cap Cleaning Liquid 1-Liter Bottle.

790.cb295-Flushing Liq 1L....SAM*INK® 9000s no.790 Flushing Liquid 1-Liter Bottle.

790.cb295-Flushing Liq 25L...SAM*INK® 9000s no.790 Flushing Liquid 25-Liter Pail.

Call our dealers, licensees, or franchisees for a free on-site demonstration today!

This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it

SAM*INK ICC Color Profiles for any Media.

Frequently Asked Questions

Feedback Form.doc
Feedback Form.pdf
Are the SAM*INK® 790 inks compatible on the HP DesignJet 9000s and DesignJet 10000s printers?
Yes. the SAM*INK® 790 inks is specifically designed for the HP DesignJet 9000s and DesignJet 10000s printers.
How does the SAM*INK® 790 inks compare to the HP 780/790 inks?
The chemistry is identical...same low solvent vehicle butyl glycol acetate in the HP 780 & 790 inks. The image quality, colors, and printhead compatibility and media compatibility are the same.
How does SAM*INK® compare to HP 781 / 791 inks?
You do not need to flush the ink lines and you do not need to install new color profiles on your RIP to print the same colors you have painfully designed for your customers.
Can SAM*INK® 790 inks be used with HP 780 / 790 inks?
Yes, you can mix SAM*INK® 790 inks with HP 780 / 790 inks with no worries.
Can SAM*INK® 790 inks be used with HP 781 / 791 inks?
No, it is mandatory to charge flushing the ink lines 2-times to completely remove the HP 781 / 791 inks before charging for 1-time SAM*INK® 790 inks. Their color pigments and ink chemistry are different.
Where can I buy SAM*INK® 790 inks?
List of franchisees near you.
What is the price per 1-liter cartridge?
We are the ink-maker so we only mark up from raw materials cost. Please contact our franchisees for prices.
What is the shelf life?
1-year from the manufacturing date...marked onto the cartridge.
Are the HP cleaning fluids and materials compatible with SAM*INK® 790 inks?
Yes, all HP 780 / 790 cleaning fluids and swabs and SAM*INK® 790 cleaning fluids and swabs are compatible.
Are HP DesignJet 8000, 9000s, and 10000s spare parts and services available also?
Absolutely...our nearest franchisee's serviceman should be on-site within 4-hours with spare-parts.
Matched color-gamut?
You get to use the same RIP color profiles that your graphic-artist have adjusted with his many man-hours on your computer for the many of your returning customers. You get to use the same current spectra-photometers that you have purchased. If your customers require a larger color-gamut than the OEM, we can contract and custom-make a high-density-ink, HD-ink, for you.
Matched media compatibility?
You get to use the same media that your customers have approved and the same media-supplier-relationship that you have so painstakingly developed. Our inks are made with polymer-resins that are compatible to the OEM and will adhere to your outdoor medias. If your customers require their prints on a special substrate, we can also contract and custom-make a polymeric-resined ink to adhere onto their special substrate.
Matched ink compatibility?
You can just plug in the cartridge and use it -- plug & play. The inks are chemically engineered to inter-mix stabally in the printer's ink-tube-system, sub-tank and print-head. They will not chemically crash into each other and loose their initial properties. After you have finished using the inks in our cartridge, you can just plug back in the OEM cartridge and continue to use. You do not need to change any settings or flush out the OEM inks.
Chips compatibility?
The printer will recognize the cartridge like an OEM cartridge. The ink level, like the OEM, will start at 100% and decrease to down to 0%. Now the 64s chips has different programs for the regions of the USA, Europe, Asia, and Japan. The 9000s chips do not have regionalities.
Printhead Protection?
The ink pigments are already nano-sized particles sourced from our ISO9001 Approved Supplier List for consistency of quality and long-term business stability. Our finished inks are filtered down to the microns and under a strict ISO9001 complaint process. Our ink-making personnel are well-paid, emotionally-committed, educationally qualified, thoroughly trained, and certified ink-makers before they are allowed to work. The printhead is not given a chance to clog. If there is banding, it will be due to an environmental temperature which have a direct effect on viscosity. Other than that, the nozzle openings may have dried because they have not been used for a period of time and a printhead cleaning by the machine will bring back the nozzle to life.
The font panel displays INK PAST EXP. DATE. How do I continue?
The 9000s can continue to print! Just press the OK key to continue or the CANCEL key to replace the ink cartridge. Press the OK key again to confirm that you want to use an expired ink cartridge.
The printer displays a higher ink level of 2% to 50% than the actual ink remaining in the cartridge, for a long time, before displaying 0%.
The 9000s 790 ink-cartridge, unlike the 5000 no.81 ink-cartridge, does not have any built in ink level sensor.
The 9000s printer depends on a counter to estimate the ink level in the cartridge.
This counter is a plastic sensor with an LED shining onto a rotating circular disc.
The circular disc has a silver reflector.
The number of times the reflector reflects light back onto the sensor helps the printer record the number of revolution or turns of the circular disc.
The circular disc is driven by way of a gear system from the peristaltic pump motor that sucks ink out of the cartridge.
The printer then calculates the amount of ink consumed in a cartridge and displays it onto an LCD display.
Often when there is dust, dirt, worn out gear, worn out LED, or worn out LED sensor, the calculations goes wrong.

The printer is protected from this error by 2 limit switch sensors on the sub-tank ink-bag.
The sub-tank's ink-bag limit-switch sensor triggers the 0% indication when both the sub-tank ink-bag and the ink-cartridge are empty.

The error can remain at 2% to 50% for a long time until both the sub-tank and ink-cartridge are empty.
When the sub-tank indicates that the ink-cartridge is empty. Both the sub-tank and ink-cartridge are empty.

An ink level display error can also occur if the operator pulls the cartridge out of the printer while the printer is printing.
There is no cartridge chip to record the depleting ink level, so the printer can only remember the same ink level before the cartridge was pulled out.
When the same cartridge is re-inserted, the printer informs the same chip of the old higher ink level. Where is actual fact, the sub-tank ink-bag is already depleted.
When I print in 4-pass. I see banding. When I print in 8-pass, I do not see banding anymore!

The Medium print mode of the DesignJet 9000s - Medium (540x720 DPI) Fine Draft (4 Pass)- can not be used with nest jobs and layout jobs. Please use the "Low" and "High" print modes for nested or layout jobs.

* Print mode Medium (540x720 DPI) Fine Draft (4 Pass)
Quality +++
Speed ++++++
* Print mode High (720x720 DPI) Normal (4 Pass)
Quality ++++
Speed +++++

* Print mode High (720x720 DPI) High Quality (8 Pass)
Quality +++++
Speed ++++
* Print mode High (720x720 DPI) High Density (8 Pass x 2)
Quality ++++++
Speed +++

* Print mode High (720x720 DPI) High Density 2 (16 Pass)
Quality +++++++
Speed ++

* Print mode High (720x720 DPI) High Density 2 (16 Pass x 2)
Quality ++++++++
Speed +

After six (6) months, the HP 8000s / 9000s / 10000s printer parts are not new anymore.
The printer's dampers (spring weakening), printheads (aging piezo nozzles), wiper blades (solvent corrosive resistance), capping station (mechanical fatigue), motors, are subjected to wear and tear.
Any one of the aged and worn parts will obviously subject the printer to a lesser than optimal or flawless print quality.
4-pass printing, although fast, is the very first event and print mode that an end-user will notice banding and as a result noticeable color shifting. This is undeniable and globally factual.
Many people have different names for this...banding, media incompatibility, color shifting, ink drying out, ink dropping out, color profiles not performing, media axis movement out of calibration, ....
This is why resellers and servicemen of this printer could never recommend or guarantee indefinite flawless printing in 4-pass mode and quite honestly refuse to service a printer who demands to print in 4-pass mode.
No amount of color re-profiling after twelve (12) months of printing will ever get the pantone colors right in the 4-pass mode.
We have witnessed servicemen physically walk away from unreasonable and abusive end-users and forever refuse to pick up their service calls.
This unfortunate natural phenomenon, Force Majuere, or act of God has resulted in misunderstandings, unhappiness, quarrels, claims, and even law-suits. Oh My Goodness!
This is why the printer maker has provided photographic and more sustainable print modes in the 8-pass, 10-pass, 12-pass, 14-pass, and 16-pass backlit modes.
We saw and learned this three years ago since 2008 and have optimized SAM*INK® 8000s / 9000s / 10000s no.790 inks to optimized color, media-compatibility, drying-times, from the 8-pass mode upwards into the 16-pass photographic backlit modes.
It would be reckless, irresponsible, and a gross misrepresentation for SAM*INK® to legally guarantee flawless printing in the 4-pass mode.
Because of this Force Majeure (act of God), we simply could not recommend, could not guarantee, and could not forever support color profiling and flawless printing in the 4-pass print mode
When the carriage accelerates along the printer, there are changes in the ink-pressure inside and along the ink-tube system between the sub-tank to the carriage. This change in ink-pressure will distort the nice-round ink-drop and ink-tail formation firing out of the printhead and you will see banding. The air-damper will dampen the changes in the ink-tube system ink-pressure to ensure an ink-reservior sitting on the carriage that gives a constant and smooth ink-pressure to the printheads.

The ink will go though 2-filters before the ink reaches the printhead. One filter is located in the ink-cartridge-needle-assembly just when the ink travels out of the cartridge and into the printer. The other is in the air-damper located on the carriage. Any ink would have dried in the system and will crystallize up the 2-filters after about 6-months.
1. Insert the six-flush cartridges and charge 2-times.
2. Change the air-damper, clean or change the ink-cartridge needle filter assembly.
3. Insert ink-cartridges and charge 2- times.
I see banding at high temperatures.
Customers usually print at 40 degrees Celsius.
Two fans located on the carriage will start to blow and cool the printheads at 30 degrees Celsius.
On page 101 of the HP user's guide...If you see banding and you have already performed media advance calibration, you should try adjusting the heater temperature and print mode settings. Banding may be caused by the following factors:
- Small print dot size: heat will cause a smaller dot size. The higher the heater temperature, the smaller the dot size.
- Ink absorption of the media: if the media you are using is not capable of absorbing the ink sufficiently to dry, this will result in banding.

To improve ink placement and absorption, please try the following:
- Set a lower print temperature or use HP's Onyx RIP settings.
- Change the print mode to reduce the quantity of ink placed onto the media,
- Change the print mode from bi-directional printing to uni-directional printing.

Please do not change all the above at the same time. Change the above one-at-a-time and print the Image Quality print to check for banding. One single change can make the banding go-away. If the image quality still does not improve, we recommend that you please change the media.
- Change the voltage setting of the printhead in question. You can first lower the voltage by 1-volts on both sides and if it does not work try increasing the voltage by 1-volt.
Do you make Chips?
Yes, they have OEM-like functionality and design. Consistent reliability. IP Reviewed. Our advanced chip design, in-house manufacturing and automation capabilities, plus full emulation know-how, allows us to develop chips for inkjet applications that match the OEM footprint and provide desired printer functionality. SAM*INK inkjet chips provide accurate low-ink and ink-out messaging. Like the OEM chip, when ink-out occurs, SAM*INK chips will shut-down the printer to prevent damage to the printheads, caused by printing with a dry cartridge.
Only SAM*INK has multiple dedicated engineers working full-time solely on new chip development. Using chips from SAM*INK means never taking a risk that your chips you have in the field will ever fail, or fail your business, now or in the future.
Why do I need to change the Wiper station? and how often?
HP DesignJet 9000s Wiper-Station's sponge start to wear-out after 6-months.
Worn-out sponge particles are later picked up by the blade and wiped into the printhead's nozzles.

Preventive maintenance becomes increasingly critical - please change the sponge every 6-months.
Why do I need to change Wiper blades? and how often?
HP DesignJet 9000s Wiper blades gets crusted with dried inks after 6-months.
The dried inks would scratch the printhead nozzles when they wipe the nozzle plates.
Preventive and maintenance becomes critical - please change the wiper blades every 6-months.
Why do I need to change printhead Caps? and how often?
This cap ensures that the nozzles remain wet. When you send your picture to startup the printer, the first band of ink firing out of the nozzles should be good. However, this cap in the capping station will wear and tear. When they have worn out, air will get into the caps. Air will dry the inks on the nozzles. The caps should be wet and flooded with ink all the time, if you see that they have dried, it is time to replace them.
A single color strength changed.
OEMs advises cartridges be shaken before use. Should the cartridge be sitting in the printer for more than 30-days, we advise that the cartridge be shaken 20-times before use.
+ Remove that cartridge.
+ Shake that cartridge upside down for 20-times.
+ Charge that color once. The color strength should return to normal.
+ Please shake any new cartridges upside down for 20-times before use.
How to charge all colors?
+ Press 'online' key.
+ Press 'shift' key to display PH.MAIN menu.
+ Press 'up' key to select PH.MAIN.
+ Press 'down' key twice to select INK SYSTEM OPT.
+ Press 'OK' .
+ Press 'down' key twice to select CHARGE INK SYS.
+ Press 'OK' and the printer will charge all colors.
How to charge a single color?

In the service mode, you can charge a single desired printhead color one-by-one OR all colors at the same time.

+ Enter maintenance mode by pressing 'Online' once...to go offline
+ Press 'Cancel', 'Shift', 'Cancel', 'Cancel'.
+ Password: press Left, Right, Shift, OK.
+ Press 'Down' key once.
+ You will see 'CHARGE INK SYS'. Press 'Enter'
+ Select ALL or LEFT (K, Lc, Lm) or RIGHT (Y, C, M) or K or Lm or Lc or M or Y or C.
+ Press 'Enter'.
+ 'Bottle OK?' press 'Enter'.

1st Installation & Preventive Maintenance

To ensure a fair assessment of SAM*INKs, please also order your Wiper and Cap cleaning liquids.

Use SAM*INK Wiper cleaning-liquid, Cap cleaning-liquid, and swabs to clean wipers and caps every morning.
Use SAM*INK flush cartridges to charge the ink-tube-system 2-times after printing 50 ink-color-cartridges. This ensures optimal ink flow performance.
After printing 100 ink-color-cartridges, clean ink-cartridge needle filters, re-manufacture the printheads, and change air-dampers.

Terms and Conditions

Duties of SAM*INK franchisees:

Maintain your technical service history for 3-years.
Guarantee and provide service-support for new printheads, air-dampers, ink-tube-system, ink-cartridge-needle-filters, capping-station, and wiper-station for 3-months if not more than 5 new nozzles are clogged.
Guarantee cartridge to cartridge consistency of color, ink-media compatibility, and drying-time.

Duties of Customers:

Maintain your printer's Health-Card.
Use your wiper and cap cleaning liquid every morning and night.
Charge with flush cartridges before you switch off your printer and go on holidays.

Printer's Health-Card

In the event of a complaint, the last 15-days of this health-card must be scaned and emailed to This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it , and This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Date	Time	Person	Actions	Remarks
2009.04.18	08:30	Wong	Wet Wiper Sponge?	Sponge dried over Saturday and Sunday
			Cleaned Wiper Blades?	Inks dried on wiper blades after 2-days
			Wet Caps?	Caps insides are still wet. Caps in good condition.
			Cleaned Caps?	Inks dried outside the caps. Scrapped.
2009.04.19	08:30	Min	Wet Wiper Sponge?	Sponge is wet.
			Cleaned Wiper Blades?	Blades are cleaned.
			Wet Caps?	Caps are wet.
			Cleaned Caps?	Caps are cleaned.

HP Designjet 9000s and 1000s Chips Error Messages

Cartrige-Chip Error Number Displayed at the Top-Right Corner of Printer LCD Panel	Error Type	Action
1	Check Sum Error	Replace Chip email This e-mail address is being protected from spambots. You need JavaScript enabled to view it Mail chip back for replacement.
2	Different Color
3	Different Type (OEM's Code)	Mis-alignment of Chip At Pins 1,2,3 Reseat Chip and Reinset into Printer
4	Hash Error
5	Write Error
6	Upper Limit Error
7	Serial ID I/O Error	Mis-alignment of Chip At Pins 1,2,3 Reseat Chip and Reinset into Printer
8	Different Custom Serial ID
9	Ink Remaining History Error	Insert Into Another Printer If Error 9 Remains Replace Chip email This e-mail address is being protected from spambots. You need JavaScript enabled to view it Mail chip back for replacement.

SAM INK for HP DesignJet 9000s 10000s Printheads Spare Parts

HP Designjet 9000s 10000s
Printheads & Spare Parts
q6665-60001, q6665-69001

Call our dealers, licensees, or franchisees for a free on-site demonstration today!

This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it

HP DesignJet 9000s & 10000s Print Head Assembly
Q6665-60001 , Q6665-69001

Seiko Color Painter 64s & 100s Print Head Assembly

Resolution: 180 dpi x 2 rows = 360 dpi
256 nozzles x 2 rows = 512 nozzles
Dimensions: 67mmW x 40mmD x 72mmH
12.8 KHz, 14-Pico-Liters, 720 dpi.

Question: What is the life-time of the printhead?

It depends on a combination of factors like:

the number of times a nozzle is fired,
media-printhead crashes,
print-system design,
daily wiping with rubber blade or cloth,
daily pressure purging of inks from the nozzle holes,
daily capping of the heads during idling period,
ink chemistry.

Question: How is the HP9000s printhead different from the HP5500 printhead?

The printhead used in the HP5500 inkjet printer is a Thermal-System that ejects ink with the pressure of a bubble generated from the boiling of ink by heat generation. The HP9000s printhead is a Piezo-System that ejects ink with the pressure of a piezo-element that changes its form when voltage is applied.

The shear mode piezo inkjet head emits ink with the deformation of a piezo-electric element by shearing and not by expansion and contraction. Because it is driven by low electrical power, it has the advantage of utilizing multiple channels and allowing a wide variety of inks with different characteristics to be used. The demand for smaller droplets, higher speed, and higher driving efficiency is realized in this head by optimizing the shape of its ink channels (pressure chamber) and the form of its nozzles.

Ink is ejected from the nozzle in droplets when a voltage is applied to the actuator (pressure ink-chamber partition) made of a piezo-electric material. The form of the actuator-ink-chamber changes in both directions to increase the internal pressure within the ink-chamber. Ink is supplied from the ink-chamber to the nozzle by capillary attraction to make up for the ejected ink. In this way, the nozzle is continually refilled with ink and ready for the next ink ejection.

Part Number	HP Designjet 9000s Mechanical Parts Description	Price
q6665-60001	See q6665-69001. 9000s Series Head
q6665-60002	Wiping Door
q6665-60003	Lower Wiping Cover
q6665-60004	Top Cover
q6665-60005	Capping Door
q6665-60006	Lower Capping Cover
q6665-60007	Upper Side Cover
q6665-60008	Lower Side Cover
q6665-60009	Right Sub-Tank Cover
q6665-60010	Left Sub-Tank Cover
q6665-60011	Top Side Cover
q6665-60012	Rear Cover
q6665-60013	Right Rear Ink Cartridges Cover
q6665-60014	Right Ink Cartridge Door
q6665-60015	Left Rear Ink Cartridges Cover
q6665-60016	Side Ink Cartridge Cover
q6665-60017	ROM Read-Only-Memory NVRAM
q6665-60018	Main PC Board - Controls and Drives the Printer. Includes the Non-Volatile Random Access Memory (NVRAM) module. For Desingjet 9000s Printer Series.	2,499
q6665-60019
q6665-60020
q6665-60021	Firmware Access Cover
q6665-60022	Electronics Module Cover
q6665-60023	Power-Supply Unit
q6665-60024
q6665-60025	Heater Panel
q6665-60026
q6665-60027
q6665-60028	Media Edge Guard
q6665-60029	Center Platen
q6665-60030
q6665-60031	Front Heater
q6665-60032	Rear Heater
q6665-60033
q6665-60034	Level Knob
q6665-60035
q6665-60036	PinchWheel Assembly
q6665-60037
q6665-60038	TUR Take-Up-Reel Tenson Roller
q6665-60039
q6665-60040
q6665-60041	Encoder Strip
q6665-60042	Belt - Long Metal Belt that moves the Carriage Assembly	291
q6665-60043	Drive Pulley
q6665-60044
q6665-60045
q6665-60046	Trailing Cable Assembly
q6665-60047	Head Connector Assembly
q6665-60048
q6665-60049
q6665-60050
q6665-60051	Air Dumper
q6665-60052
q6665-60053	Ink Pump Assembly
q6665-60054	Ink Pump Tube
q6665-60055	Right Ink Supply Station
q6665-60056	Left Ink Supply Station
q6665-60057
q6665-60058
q6665-60059	SubTank Assembly
q6665-60060	Order Q6693-60022 Capping Station Assembly
q6665-60061	Capping Unit	50 / Cap
q6665-60062
q6665-60063	Prime Assembly
q6665-60064	Wiping Station Assembly
q6665-60065	Wiper Cleaning Assembly	150
q6665-60066	Wiper Blade	150
q6665-60067	Wiper Belts
q6665-60068	9000s Series Waste Bottle
q6665-60069	Casters
q6665-60070	Carriage Height Adjust Tool
q6665-60071	Head Position Adjustment Tool
q6665-60072
q6665-60073
q6665-60074
q6665-60075
q6665-60076	TUR Take-Up-Reel Paper Hub
q6665-60077	Right Media Feed
q6665-60078	Left Media Feed
q6665-60079	Media Feed Flange
q6665-60080	Ink Waste Bottle Lock
q6665-60081	Left Rear Ink Cartridge Cover
q6665-60082	DesignJet 9000s Carriage Kit
q6665-60083	Service Maintenance Kit
q6665-60084	Foot Assembly
q6665-60085
q6665-60086
q6665-60087	Media Securing Unit
q6665-60088	Carriage Base Plate
q6665-60089	Cleaning Sheets Kit
q6665-60090
q6665-60091
q6665-60092
q6665-60093	Air Dumper To PrintHead Tubes Kit
q6665-60094	O-Rings From Pump To SubTank Kit
q6665-60095	O-Rings From SubTank to PrinHead Kit
q6665-69001	9000 Series Print Head
q6693-60022	Capping Station Assembly
q6693-60060	Pinch Roller Blade Service
q6693-60066	Purging Cartridges

Part Number	Accessory Tools Parts Description	Price
q6665-60070	Carriage Height Adjustment Tool
q6665-60071	Print Head Position Adjustment Tool
q6665-60082	DesignJet 9000s Carriage Kit

Part Number	9000s Cable Parts Description	Price
C7790-60425	Service 5-Meters USB A-B Cable

Part Number	9000s ElectricalParts Description	Price
Q6665-60024	Rear Cover Sensor
Q6665-60026	Media Level & Carriage Home Position Sensor
Q6665-60027	FrontPanel
Q6665-60030	Vacuum Fan
Q6665-60033	Media Sensor
Q6665-60035	Paper-Axis Motor
Q6665-60037	End-Of-Media Sensor
Q6665-60039	Take-Up-Reel Sensor
Q6665-60040	Take-Up-Reel Motor
Q6665-60044	Scan-Axis Motor
Q6665-60049	Encoder Sensor
Q6665-60050	Line-Sensor
Q6665-60052	Print Head Cooling Fan (On Carriage)
Q6665-60057	IC Door & Waste Sensor
Q6665-60058	Sub-Tank Sensors
Q6665-60062	Selenoid Assembly

Part Number	9000s Electronic Logic & Interface Boards	Price USD
Q6665-60018	9000s Series Main PCA Printed-Circuit-Assembly PC Board : Main PC board - Controls and drives the printer - Includes the Non-volatile random access memory (NVRAM) module. For Designjet 9000s printer series	This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Q6665-60019	Head Relay Board(Print Head)
Q6665-60020	Heater Relay Assembly
Q6665-60048	Carriage PCA Printed-Circuit-Assembly

Call our dealers, licensees, or franchisees for a free on-site demonstration today!

This e-mail address is being protected from spambots. You need JavaScript enabled to view it , This e-mail address is being protected from spambots. You need JavaScript enabled to view it

First Published: 2010-September-22th.
Last Updated: 2013-February-20th.

Printable version

SAM*INK® inks 9000s 10000s

Frequently Asked Questions

1st Installation & Preventive Maintenance

Terms and Conditions

Printer's Health-Card

HP Designjet 9000s and 1000s Chips Error Messages

SAM INK for HP DesignJet 9000s 10000s Printheads Spare Parts

HP Designjet 9000s 10000sPrintheads & Spare Partsq6665-60001, q6665-69001

HP Designjet 9000s 10000s
Printheads & Spare Parts
q6665-60001, q6665-69001